Compiling Xen

From Wikislax

(Difference between revisions)
Jump to: navigation, search
(Created page with "{{RightTOC}} == What is Xen ? == [http://wiki.xen.org/wiki/Xen_Overview Xen] is an hypervisor, a thin software layer executing multiple virtual machines, each running its own o...")
Line 52: Line 52:
== Compiling a dom0 Kernel ==
== Compiling a dom0 Kernel ==
-
Domain-0 (dom0 for short) is a special guest (virtual machine) that the Xen hypervisor always loads on host startup. Dom0 is used to control and manage the Xen hypervisor, and provides virtual disks and networks for other unprivileged guests (=domUs). Dom0 support was introduced in Linux kernel 3.0. The detail of the Xen configuration options can be found on [http://wiki.xen.org/wiki/Mainline_Linux_Kernel_Configs this page]. This minimal [{{SERVER}}/wikislax/download/config-dom0 .config file] includes them all, compiled as static rather than modules, and supports the hardware configuration mentionned above. Feel free to use it as a base, replacing device drivers as required. The rest of the kernel compilation is nominal :
+
Domain-0 (dom0 for short) is a special guest (virtual machine) that the Xen hypervisor always loads on host startup. Dom0 is used to control and manage the Xen hypervisor, and provides virtual disks and networks for other unprivileged guests (=domUs). Dom0 support was introduced in Linux kernel 3.0. The kernel generated must include the .config file domU and [http://wiki.xen.org/wiki/Mainline_Linux_Kernel_Configs#Configuring_the_kernel dom0 options]. Here is a minimal example of such a [{{SERVER}}/wikislax/download/config-dom0 .config dom0] file. Feel free to use it as a base, replacing device drivers as required. The rest of the kernel compilation is nominal :
  # tar -C /usr/src -xvf linux-3.4.2.tar.bz2
  # tar -C /usr/src -xvf linux-3.4.2.tar.bz2

Revision as of 21:18, 5 July 2012

Contents

What is Xen ?

Xen is an hypervisor, a thin software layer executing multiple virtual machines, each running its own operating system. Xen is normally used as a server virtualization platform, running on headless servers without graphical console and controlled through the network. However it is also possible to run Xen on graphical desktops, and with proper hardware virtualization, to dedicate the primary graphics card (and keyboard / mouse) to a virtual machine, making it possible to have high performance full 3D and video acceleration in a virtual machine (see Xen VGA Passthru). Xen is otherwise free and open source.

Hardware requirements

Xen runs on Intel X86 hardware and requires a processor and motherboard supporting VT-x and optionally VT-d for hardware virtualization. See this page for a list of Intel compatible motherboards and chipsets and this page for a list of compatible processors. Our system running Xen successfully at the time of this writing (June 2012) is based on a DZ77GA70K Intel motherboard, an Intel® Core™ i7-3770 Processor (the overclockable i7-3770 "K" model does not afford virtualization), 32 Gb of PC12800 memory and an MSI GeForce G210 graphics board.

Documentation difficulties

Although the software itself works well and is pretty straighforward, good quality Internet information is missing. The volume of information on the Xen wiki is plethoric, but mostly irrelevant as pertaining to old versions of everything. Building the big picture requires interpretation of tiny bits in forum messages, a pretty painful process, although I have to recognize that it worked for me in the end. An alternative is to use one of these old-style information repositories named "books". Yes it is pretty old-fashionned ;) but actually there are good ones on the topic. Here is the most recent I found, it is a good value but of course you can find more on amazon(.co.uk).

Software constraints

To make a long story short, at the time of this writing (June 2012) working with nVidia graphic boards on Xen and X11 requires the "nouveau" driver. Other drivers like nv or the nVidia proprietary driver do not support Xen and switch off the screen when launched or do not display properly. "Nouveau" requires a fairly recent version of X11. Slackware 13.37 or newer is required. "Nouveau" is available in kernel 3.4.2 upstream and was previously included as a staging driver. Xen dom0 support was included in kernel 3.0. To benefit from both Xen and "Nouveau", the best is to use kernel 3.4.2 upstream.

Compiling acpica

Xen requires acpica. Download then install as below :

# tar -C /usr/local -xvf acpica-unix-yyyymmdd.tar.gz
# cd /usr/local
# chown -R root:root acpica-unix-yyyymmdd
# cd acpica-unix-yyyymmdd
# less README
# cd source/tools/acpibin; make; make install; make clean
# cd ../acpiexec; make; make install; make clean
# cd ../acpihelp; make; make install; make clean
# cd ../acpinames; make; make install; make clean
# cd ../acpisrc; make; make install; make clean
# cd ../acpixtract; make; make install; make clean
# cd ../../compiler; make; make install; make clean

Compiling Xen

Download Xen from the official xen.org site. Fix a small missing file glitch in Slackware 13.37 and install :

# cd /usr/include/gcc
# ln -s stubs-64.h stubs-32.h
# tar -C /usr/local -xvf xen-x.y.z.tar.gz
# cd /usr/local
# chown -R root:root xen-x.y.z
# cd /usr/local/xen-x.y.z
# make world
# make install
# make clean

xen-x.y.z.tar.gz is now present in your /boot directory, ready to be booted by grub2 !

Compiling a dom0 Kernel

Domain-0 (dom0 for short) is a special guest (virtual machine) that the Xen hypervisor always loads on host startup. Dom0 is used to control and manage the Xen hypervisor, and provides virtual disks and networks for other unprivileged guests (=domUs). Dom0 support was introduced in Linux kernel 3.0. The kernel generated must include the .config file domU and dom0 options. Here is a minimal example of such a .config dom0 file. Feel free to use it as a base, replacing device drivers as required. The rest of the kernel compilation is nominal :

# tar -C /usr/src -xvf linux-3.4.2.tar.bz2
# cd /usr/local
# rm linux
# ln -s linux-3.4.2 linux
# cd linux
# make menuconfig
# make
# make modules_install
# cp arch/x86_64/boot/bzImage /boot/vmlinuz-dom0
# cp System.map /boot/System.map-dom0
# cp .config /boot/config-dom0

vmlinuz-dom0 is now present in your /boot directory, ready to be booted by grub2 !


Compiling from Source Main Page Compiling Grub2
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox