OpenSSL

From Wikislax
Revision as of 22:28, 6 December 2017 by Wikislax (talk | contribs) (Created page with "{{RightTOC}} == What is OpenSSL ? == [http://www.openssl.org/ OpenSSL] is an OpenSource implementation of the TLS and SSL protocols. It is used as a base for securitizing th...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

What is OpenSSL ?

OpenSSL is an OpenSource implementation of the TLS and SSL protocols. It is used as a base for securitizing the communications (authenticating, cyphering, signing) of the rest of the OpenSource server software. However, following a record of security issues, the security and quality of the software appears more uncertain. In 2013, WikiLeaks published documents obtained by Edward Snowden, which revealed that since 2010, the NSA had effectively broken/bypassed SSL/TLS by possibly exploiting vulnerabilities such as HeartBleed.

Since OpenSSL 1.0.1g, members of the OpenBSD project forked OpenSSL to create a project named LibreSSL that can be used as a plugin replacement for OpenSSL.

To make things a bit less worrying, OpenSSL is part of the base Slackware distribution and so benefits from the Slackware security advisories. The official documentation can be found on the official http site openssl.org but is somewhat cryptic. man openssl is a better option.

From an historic point of view, the SSL suite of protocols was created by Netscape to securitize communications made over TCP/IP. SSL affords encrypting the data and authenticating the parties on the wire using various methods and algorithms. SSL was the base layer to ensure confidentiality of essential TCP protocols such as smtp http pop3 nntp imap ldap. SSL encapsulates these services (and others…) using alternate protocol names and port numbers. BUT the SSL protocols were superseded by TLS and are now deprecated due to security weaknesses. SSL should not be used any longer. Instead, use TLS. Current version is TLS v1.2.

Protocol Port # Secure Protocol Secure Port # Service
SMTP 25 SMTPS 465 Mail exchange
HTTP 80 HTTPS 443 Web browsing
POP3 110 POP3S 995 Mail retrieval
NTTP 119 NTTPS 563 News exchange
IMAP 143 IMAPS 993 Mail retrieval
LDAP 389 LDAPS 636 Ldap Directory


Use only TLS

Please note : the SSL protocols were superseded by TLS and are now deprecated due to security weaknesses. SSL should not be used any longer. Instead, use TLS. Current version is v1.2

Compiling OpenSSL

OpenSSL is part of the base Slackware distribution and so benefits from the Slackware security advisories, which makes it very easy to upgrade to the most secure version at any time. If for some reason you'd nevertheless like to compile it from source, here's how to do it :

Beware : to avoid breaking other software in the distribution, openssl-x.y.z can be replaced only by a minor fix update. Be sure to check the current version number using ls /usr/lib/*ssl* first.

Installing OpenSSL is otherwise quite straigthforward : 

# tar -C /usr/local -xvf openssl-x.y.z.tar.gz
# cd /usr/local
# chown -R root openssl-x.y.z
# chgrp -R root openssl-x.y.z
# cd openssl-x.y.z
# vi README
# vi INSTALL
# make clean
# ./config --prefix=/usr/local --openssldir=/etc/ssl shared
# make
# make test
# cd /var/log/packages
# removepkg openssl-x.y.z-X86_64-2
# removepkg openssl-solibs-x.y.z-X86_64-2
# cd /usr/local/openssl-x.y.z
# make install
# make clean
# cd ../lib
# mv libssl* ../lib64
# mv libcrypto* ../lib64
# cd pkgconfig
# mv *ssl.pc ../../lib64/pkgconfig
# mv *crypto.pc ../../lib64/pkgconfig
# cd /usr/lib64
# ln -sf /usr/local/lib64/libssl.so.1.0.0 libssl.so.1
# ln -sf /usr/local/lib64/libcrypto.so.1.0.0 libcrypto.so.1
# ldconfig
# cd /etc/ssl
# cp -r man /usr/local
# rm -r man
# reboot

reboot affords making sure that nothing was missed by the install and that the system is able to boot normally. If anything went wrong be ready to manually fix your system, for example by reinstalling the default Slackware OpenSSL package using installpkg.

Using OpenSSL

Except for managing certificates (see the next paragraph) OpenSSL is not used directly but thru libraries to encapsulate other protocols such as smtp http pop3 nntp imap ldap.

Using Certificates

Using a server certificate will afford remote smtp http pop3 nntp imap ldap clients to make sure that they are connected to the right site. The server certificate contains the full domain name and other information, signed by a Certificate Authority.

To effect the real checking the clients need to get copies of the server and Certificate Authority certificates. The server certificate comes as part of the TLS protocol. The Certificate Authority certificate however must be present on the client.

This is the case for most commercial Certificate Authority certificates, that are preinstalled. Being your own Certificate Authority will save the cost of purchasing a server certificate and renewing it yearly, but it will be necessary to install the Certificate Authority certificate on every client using your services.

The home of the OpenSSL configuration is /etc/ssl. It initially include directories certs misc private to store the certificates, and a configuration file openssl.cnf, that must be edited first. You might want to change dir and certificate to these values : 

dir 		= /etc/ssl		# Where everything is kept
certificate	= $dir/certs/cacert.pem	# The CA certificate

To create a self-signed certification authority certificate :

Beware : for the certification to work, it is not possible to create a certification authority certificate and a server certificate with the same DN (X500 Directory Name). 

# cd /etc/ssl
# openssl req -new -x509 -days 3650 -keyout private/cakey.pem -out certs/cacert.pem -config openssl.cnf

Generating a 1024 bit RSA private key
.........++++++
.............++++++
writing new private key to 'private/cakey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:FR
State or Province Name (full name) [Some-State]:.
Locality Name (eg, city) []:Rennes
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Studioware
Organizational Unit Name (eg, section) []:CA
Common Name (eg, YOUR name) []:Studioware.com
Email Address []:nospam@studioware.com

To create a server certificate request :

Beware : for a server certificate, the common name must be the fully qualified domain name. A reverse DNS entry should also exist. 

# cd /etc/ssl
# mkdir newcerts
# openssl req -new -keyout newcerts/mtakey.pem -out newcerts/mtareq.pem -days 365 -config openssl.cnf

Generating a 1024 bit RSA private key
................................++++++
..................++++++
writing new private key to 'newkey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:FR
State or Province Name (full name) [Some-State]:.
Locality Name (eg, city) []:Rennes
Organization Name (eg, company) [Internet Widgits Pty Ltd]:Studioware
Organizational Unit Name (eg, section) []:MTA
Common Name (eg, YOUR name) []:inner.studioware.com
Email Address []:nospam@studioware.com

Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:
An optional company name []:

To sign the server certificate request : 

# cd /etc/ssl
# cat </dev/null >index.txt
# cat >serial
01
<ctrl>d
# cat newcerts/mtareq.pem newcerts/mtakey.pem > newcerts/mta.pem
# openssl ca -policy policy_anything -out newcerts/mtacert.pem -config openssl.cnf -infiles newcerts/mta.pem
Using configuration from openssl.cnf
Enter pass phrase for /etc/ssl/private/cakey.pem:
Check that the request matches the signature
Signature ok
Certificate Details:
       Serial Number: 1 (0x1)
       Validity
           Not Before: Jan  2 13:40:43 2007 GMT
           Not After : Jan  2 13:40:43 2008 GMT
       Subject:
           countryName               = FR
           localityName              = Rennes
           organizationName          = Studioware
           organizationalUnitName    = MTA
           commonName                = Jean-Pierre Menicucci
           emailAddress              = nospam@studioware.com
       X509v3 extensions:
           X509v3 Basic Constraints:
               CA:FALSE
           Netscape Comment:
               OpenSSL Generated Certificate
           X509v3 Subject Key Identifier:
               06:08:16:E7:C0:A3:D3:9A:D1:92:4A:6F:B8:6E:E8:28:47:79:BD:12
           X509v3 Authority Key Identifier:
               keyid:92:59:DF:C2:26:D6:54:46:46:A8:10:4E:56:CB:09:A2:E9:B4:86:93

Certificate is to be certified until Jan  2 13:40:43 2008 GMT (365 days)
Sign the certificate? [y/n]:y

1 out of 1 certificate requests certified, commit? [y/n]y
Write out database with 1 new entries
Data Base Updated

To remove the pass phrase from the server private key :

Beware : it is necessary to remove this pass phrase so that sendmail could start without any human intervention. 

# openssl rsa -in newcerts/mtakey.pem -out newcerts/mtakey.pem.unsecure
Enter pass phrase for newcerts/mtakey.pem:
writing RSA key

To move the files to the right directories with the right rights and clean up : 

# cd newcerts
# ls
01.pem  mta.pem  mtacert.pem  mtakey.pem  mtakey.pem.unsecure  mtareq.pem
# mv mtacert.pem ../certs
# mv mtakey* ../private
# rm 01.pem mta.pem mtareq.pem
# cd ../certs
# chmod go+r *
# cd ../private
# chmod go-r *

When renewing an existing certificate mtakey.pem, the following commands afford making the required copies : 

# cp mtakey.pem.unsecure apache.mtakey.pem.unsecure
# cp mtakey.pem.unsecure asterisk.mtakey.pem.unsecure
# cp mtakey.pem.unsecure ldap.mtakey.pem.unsecure
# cp mtakey.pem.unsecure news.mtakey.pem.unsecure
# cp mtakey.pem.unsecure smmsp.mtakey.pem.unsecure
# chown apache:apache apache.mtakey.pem.unsecure
# chown asterisk:asterisk asterisk.mtakey.pem.unsecure
# chown ldap:ldap ldap.mtakey.pem.unsecure
# chown smmsp:smmsp smmsp.mtakey.pem.unsecure
# chown news:news news.mtakey.pem.unsecure
# cd ../certs
# vi mtacert.pem
d59d
:$
:r ../private/mtakey.pem.unsecure
:w server.pem
:x
# chown cyrus:mail server.pem
# chmod 600 server.pem

To check an external certificate

For OpenSSL to use an external certification authority certificate, you need to place in your /etc/ssl/certs directory a copy of it and a symbolic link to this copy. The name of this link must be based on the certificate hash code (see http://www.sendmail.org/~ca/email/starttls.html). This can be done in this way : 

# C=CertificateFileName
# ln -s $C `openssl x509 -noout -hash < $C`.0


Creating VMs Main Page OpenLDAP
Retrieved from "http://studioware.com/wikislax/index.php?title=OpenSSL&oldid=23"