Difference between revisions of "ClamAV"

Revision as of 06:18, 7 July 2018

What is ClamAV ?

Clamav is an Open Source antivirus.

Installing ClamAV

Get the tarball from the download page. Install in the standard way, create a user for running the software (e.g. milter, as a single user has to be used by both Clamav and MIMEDefang).

# tar -C /usr/local -xvf clamav-x.y.tar.gz
# cd /usr/local/
# chown -R root:root clamav-x.y.z
# cd clamav-x.y
# ./configure --help | less
# ./configure --libdir=/usr/local/lib64 --mandir=/usr/local/man \
--sysconfdir=/etc --with-user=milter --with-group=milter
# make
# make install
# make clean
# ldconfig
# groupadd milter
# useradd -g milter -s /bin/false milter
# cd /var/log
# mkdir -m 700 milter
# chown milter:milter milter
# cd /var/run
# mkdir -m 700 milter
# chown milter:milter milter
# cd /usr/local/share
# mkdir clamav
# chown milter:milter clamav

Configuring ClamAV

Review the configuration files in /etc/clamd.conf and /etc/freshclam.conf. Comment out the Example line and set the other parameters as below. The User milter line tells the software to execute as user milter :

# cd /etc
# cp clamd.conf.sample clamd.conf
# vi clamd.conf
. . .
#Example
LogFile /var/log/milter/clamd.log
PidFile /var/run/milter/clamd.pid
LocalSocket /var/spool/MIMEDefang/clamd.sock
TCPAddr 127.0.0.1
User milter
DetectBrokenExecutables yes
<esc>
:x
# cp freshclam.conf.sample freshclam.conf
# vi freshclam.conf
. . .
#Example
DatabaseDirectory /usr/local/share/clamav
UpdateLogFile /var/log/milter/freshclam.log
LogFileMaxSize 2M
LogTime yes
PidFile /var/run/milter/freshclam.pid
DatabaseOwner milter
DatabaseMirror db.FR.clamav.net
NotifyClamd /etc/clamd.conf
<esc>
:x

Running ClamAV

clamd and freshclam run as daemons so must be launched at startup and stopped at shutdown. Update /etc/rc.d/rc.local and /etc/rc.d/rc.local_shutdown accordingly :

# vi /etc/rc.d/rc.local
. . .
# start clamd
if [ -x /usr/local/sbin/clamd ]; then
        echo "Starting clamd daemon: /usr/local/sbin/clamd"
        /usr/local/sbin/clamd
fi

# start freshclam
if [ -x /usr/local/bin/freshclam ]; then
        echo "Starting freshclam daemon: /usr/local/bin/freshclam -d"
        /usr/local/bin/freshclam -d
fi
<esc>
:x
# vi /etc/rc.d/rc.local_shutdown
. . .
# stop freshclam
if [ -r /var/run/milter/freshclam.pid ]; then
        echo "Stopping freshclam: kill -INT `cat /var/run/milter/freshclam.pid`"
        kill -INT `cat /var/run/milter/freshclam.pid`
fi

# stop clamd
if [ -r /var/run/milter/clamd.pid ]; then
        echo "Stopping clamd: kill -INT `cat /var/run/milter/clamd.pid`"
        kill -INT `cat /var/run/milter/clamd.pid`
fi
<esc>
:x

At this stage freshclam can be launched manually to initialize the virus database however clamd will fail as it requires a socket created by MIMEDefang when starting up. So we will delay clamd execution until MIMEDefang Sendmail with Milter are ready for use.

Testing ClamAV

Don't run rc.local now. Download the ClamAV database first:

# freshclam

eicar.com is a test signature for ClamAV. Make sure it works for you.

# clamscan -r -l scan.txt ./eicar.com 
./eicar.com: Eicar-Test-Signature FOUND

----------- SCAN SUMMARY -----------
Known viruses: 4890369
Engine version: 0.99.2
Scanned directories: 0
Scanned files: 1
Infected files: 1
Data scanned: 0.00 MB
Data read: 0.00 MB (ratio 0.00:1)
Time: 6.302 sec (0 m 6 s)